Aznjap's Jrsc progress thread

Go down

Aznjap's Jrsc progress thread

Post by aznjap808 on Thu 17 Feb 2011, 6:51 am

Well decided why not make a progress thread since my life basically revolves around the lude! Sorry but this is gonna be a pretty long first post!

Well I'll do a brief intro to my world of ludes. My first Lude was an auto with 100k miles. Came dropped with rims and a cheap black paint job.




After a year, sold it to pick up a standard. You guys might actially know the previous owner of this lude. His lude actually won POTM. His username was Kayo. Well he parted everything out on his lude and brought it back to bone stock with the exception of the ATTS emblem and jdm fogs.





The lude was in excellent condition. And seeing how the previous owner was the ex-president of the local prelude club, I knew the car was taken care of.

The first mods on the car was a greddy front lip and a neuspeed strut bar that I also picked up from the previous owner.





I installed a remote start alarm into my car a few days after picking up the car. A week later, the valet at my work place parks my car and leaves it in first gear with the ebrake down.

So as I was leaving work, I remote started my car and I heard a crash outside. I run outside to find that my car had started and sailed across the parking lot into the wall of the building :wzbigcry: Man was I pissed!

Well no pics, but bumper was pretty smashed and the greddy lip was cracked in half. Had the bumper repaired and repainted.


A few weeks later I picked up ap1 rims for $300.





Then had them painted gunmetal a few days later tongue





Picked up ksport coilovers for pretty cheap and a skunk2 catback exhaust.





Well that greddy lip wasn't holding up too good so I found someone local selling a wwrs front lip for cheap and threw that on instead.




Well the new morimoto mini projectors came out, and with Shimee's nicley detailed write up, I decided to give it a try. So bought black depo headlights and the projectors.




After about 7 hours later, finally had em done and straight!








Finally saved up enough to get the rest of the lip kit.
Oh, and got a new licence plate Smile




Alright thats enough for now. I'll post up the rest later!
avatar
aznjap808
Newb
Newb

Posts : 36
Join date : 2011-01-31

Back to top Go down

Re: Aznjap's Jrsc progress thread

Post by aznjap808 on Thu 17 Feb 2011, 6:53 am

Got a 2.5" apexi N1 catback. Doesn't sound nearly as good as the skunk2, but I need the 2.5" exhaust for my set up.






Also threw on a hytech replica header. Had some problems with the crossmember. Had to cut a really big chunk out of it. More than everyone else had too. Oh wells, it works now Very Happy











Got jdm visors. Gonna wet sand and make it shiney again. Not sure if I'm feeling it but we'll see if I keep it.








Just picked these babies up today Smile









This just came in the mail today. PnP Boomslang harness gor the greddy emanage.






Well I guess I'll get to the sc pics.

Picked this up about a month ago. I'm pretty sure it's complete haha.





Then picked this up to go along. RC 440 injectors






Finally installed the spacers. Had 5mm spacers on the back, so I threw those onto the front.

Before and after pics












avatar
aznjap808
Newb
Newb

Posts : 36
Join date : 2011-01-31

Back to top Go down

Re: Aznjap's Jrsc progress thread

Post by aznjap808 on Thu 17 Feb 2011, 7:01 am

Picked up a cf hood! Smile






Finally fully tuned.

Ending numbers: 215hp-194tq

A little dissapointed, was expecting at least 220hp and 200tq but oh wells. The tuner thinks my exhaust is creating a restriction, so I'm going to change it to a 3" mandrel bent catback soon.

Mods are:

JRSC
Hytech replica header
2.5" high flow cat
2.5" catback to apexi n1 muffler
aem sri
Tuned on emanage ultimate

avatar
aznjap808
Newb
Newb

Posts : 36
Join date : 2011-01-31

Back to top Go down

Re: Aznjap's Jrsc progress thread

Post by xxfallacyxx on Thu 17 Feb 2011, 2:38 pm

looks awesome man. How big of a difference was it going from Base to SH handling wise?

_________________
XLII
Vitae, universum, et omnia
With great beard comes great responsibility.

1999 Honda Prelude Base model - My baby
1991 Honda Prelude Si 4WS - Oh look, a progression thread (<--Click!)
PIRATES!
avatar
xxfallacyxx
The Meat
The Meat

Posts : 1693
Join date : 2011-01-26
Age : 32
Location : Computer Bound

http://preludehaven.forumotion.com

Back to top Go down

Re: Aznjap's Jrsc progress thread

Post by aznjap808 on Thu 17 Feb 2011, 5:10 pm

Thanks. I dont know exactly, but I know the sh handles amazingly well. I never really had fun with the base since it was an auto.
avatar
aznjap808
Newb
Newb

Posts : 36
Join date : 2011-01-31

Back to top Go down

Re: Aznjap's Jrsc progress thread

Post by Press10 on Thu 17 Feb 2011, 6:04 pm

yeah... i saw your post on pp... uber jealous of your latest pickup

_________________
avatar
Press10
Moderator
Moderator

Posts : 1420
Join date : 2011-01-26
Age : 27
Location : UTAH

Back to top Go down

Re: Aznjap's Jrsc progress thread

Post by h22avtec on Fri 18 Feb 2011, 1:41 am

I'm jealous... I want me some Hytech header lol!
avatar
h22avtec
Newb
Newb

Posts : 5
Join date : 2011-02-17
Age : 26
Location : New York

Back to top Go down

Re: Aznjap's Jrsc progress thread

Post by aznjap808 on Sat 19 Feb 2011, 2:19 am

Yeah, they are a very nice addition to an engine bay. Should hit up kronn or hookid for one
avatar
aznjap808
Newb
Newb

Posts : 36
Join date : 2011-01-31

Back to top Go down

Re: Aznjap's Jrsc progress thread

Post by aznjap808 on Wed 23 Feb 2011, 7:38 pm

New wing Smile








avatar
aznjap808
Newb
Newb

Posts : 36
Join date : 2011-01-31

Back to top Go down

Re: Aznjap's Jrsc progress thread

Post by r34zman on Thu 24 Feb 2011, 2:12 am

Im jealous of that jrsc sitting in the back of your bay! I bet it sounds so good too Smile
avatar
r34zman
Newb
Newb

Posts : 21
Join date : 2011-02-08
Age : 28
Location : Nashville, TN

Back to top Go down

Re: Aznjap's Jrsc progress thread

Post by aznjap808 on Thu 24 Feb 2011, 5:51 pm

Haha thanks! And yes it's the most beautiful sound ever lol. Too bad my exhaust is so damn loud you can barely hear it. Im going to be changing my exhaust soon to quiet it down so I can hear it better. Very Happy
avatar
aznjap808
Newb
Newb

Posts : 36
Join date : 2011-01-31

Back to top Go down

Re: Aznjap's Jrsc progress thread

Post by Tim1137 on Fri 25 Feb 2011, 8:51 am

You should send out the JRSC to be ported, espeiclaly the elbow on it is a huge restriction. Then uprgade the pulley and retune. Im sure you will be happy with it then. Also Id consider adding a heatshield intake gasket since the JRSC is a gigantic heat sink and I bet your intake temps are off the chart
avatar
Tim1137
Enthusiast
Enthusiast

Posts : 158
Join date : 2011-01-27

Back to top Go down

Re: Aznjap's Jrsc progress thread

Post by xxfallacyxx on Fri 25 Feb 2011, 8:58 am

He could also have the JRSC ceramic coated while he's at it lol

_________________
XLII
Vitae, universum, et omnia
With great beard comes great responsibility.

1999 Honda Prelude Base model - My baby
1991 Honda Prelude Si 4WS - Oh look, a progression thread (<--Click!)
PIRATES!
avatar
xxfallacyxx
The Meat
The Meat

Posts : 1693
Join date : 2011-01-26
Age : 32
Location : Computer Bound

http://preludehaven.forumotion.com

Back to top Go down

Re: Aznjap's Jrsc progress thread

Post by Press10 on Fri 25 Feb 2011, 1:07 pm

no not ceramic coated he would want the heat dissipation coating. although the best one comes in a tanish color unknown has a black that isnt as good as the tanish but would still lower the temps.

_________________
avatar
Press10
Moderator
Moderator

Posts : 1420
Join date : 2011-01-26
Age : 27
Location : UTAH

Back to top Go down

Re: Aznjap's Jrsc progress thread

Post by xxfallacyxx on Fri 25 Feb 2011, 1:30 pm

Forget coating, buy a shit ton of heat sinks and apply them with arctic silver thermal grease

http://www.newegg.com/Product/Product.aspx?Item=N82E16835108071&cm_re=heatsinks-_-35-108-071-_-Product

Function > Form

Cool face

_________________
XLII
Vitae, universum, et omnia
With great beard comes great responsibility.

1999 Honda Prelude Base model - My baby
1991 Honda Prelude Si 4WS - Oh look, a progression thread (<--Click!)
PIRATES!
avatar
xxfallacyxx
The Meat
The Meat

Posts : 1693
Join date : 2011-01-26
Age : 32
Location : Computer Bound

http://preludehaven.forumotion.com

Back to top Go down

Re: Aznjap's Jrsc progress thread

Post by aznjap808 on Fri 25 Feb 2011, 10:53 pm

I would get it ported but idk if I wanna bring it back to stock to wait for it to ship out and back. lol maybe when I take it off the next time. And I know I couldeasily suprass the 220hp mark with the upgraded pulley, but I was hoping on hitting the 220 mark on the stock pulley so when I do upgrade the pulley, I would hit 250.

Hmm there's a coating I could put on the intake to lower temps? I'll seriously look into that.
avatar
aznjap808
Newb
Newb

Posts : 36
Join date : 2011-01-31

Back to top Go down

Re: Aznjap's Jrsc progress thread

Post by Press10 on Fri 25 Feb 2011, 11:54 pm

yes sir there is Very Happy i guess he even got a better black color and the other one wasnt a tanish, its a silver... not sure how i mixed them up lol

https://www.facebook.com/#!/album.php?aid=197158&id=311716665858

_________________
avatar
Press10
Moderator
Moderator

Posts : 1420
Join date : 2011-01-26
Age : 27
Location : UTAH

Back to top Go down

Re: Aznjap's Jrsc progress thread

Post by aznjap808 on Sun 27 Feb 2011, 1:33 am

Hmm intresting, it actually looks pretty good. How well does it perform though? And this might be a dumb question, but can you paint that coating? lol

Just got my calipers back from the shop. Not sure if I like the blue, what do you guys think? Btw, my car is black with gunmetal ap1's. And my vc and intake is gonna be blue soon too.









Also installed these today Very Happy















avatar
aznjap808
Newb
Newb

Posts : 36
Join date : 2011-01-31

Back to top Go down

Re: Aznjap's Jrsc progress thread

Post by r34zman on Sun 13 Mar 2011, 3:17 am

One day... I wish to also have a jrsc and nsx brakes. Keep up the great work man!

Oh and I just noticed there is no engine bay shots. Stop holding out on us Sad
avatar
r34zman
Newb
Newb

Posts : 21
Join date : 2011-02-08
Age : 28
Location : Nashville, TN

Back to top Go down

Re: Aznjap's Jrsc progress thread

Post by aznjap808 on Sun 13 Mar 2011, 8:50 pm

r34zman wrote:One day... I wish to also have a jrsc and nsx brakes. Keep up the great work man!

Oh and I just noticed there is no engine bay shots. Stop holding out on us Sad

Haha yeah man, jrsc is the way to go!

Ohh didn't realize that, I'll try get up engine bay shots tonight or something.

Havent been updating this post well,

Relocated battery to the trunk (no pics yet).

Got my 3" exhaust to a vibrant flat black muffler. It has a vibrant ultra quiet resonator where the cat used to be. And another reg resonator. I'll get a vid up tomorrow or something.









And the difference between 2.5" exhaust and a cat delete with 3" exhaust.

avatar
aznjap808
Newb
Newb

Posts : 36
Join date : 2011-01-31

Back to top Go down

Re: Aznjap's Jrsc progress thread

Post by Wing on Sun 13 Mar 2011, 9:56 pm

a 12whp gain from 2.5 to 3"?!?!

That's pretty fucking good! - now if only I hadn't purchased the full Evo2.....
avatar
Wing
Been around a bit
Been around a bit

Posts : 535
Join date : 2011-01-26
Age : 30
Location : DelaWHERE?

Back to top Go down

Re: Aznjap's Jrsc progress thread

Post by aznjap808 on Mon 14 Mar 2011, 7:15 pm

Haha yups 12hp gain is pretty good! Don't forget I also deleted the cat. AND I'm boosted lol.

Return em and get the vibrant set up! You'll love it!

https://www.youtube.com/watch?v=QW3_qp3wZ7g
avatar
aznjap808
Newb
Newb

Posts : 36
Join date : 2011-01-31

Back to top Go down

Re: Aznjap's Jrsc progress thread

Post by GreenLude on Wed 21 Sep 2011, 1:03 am

love the plate.
avatar
GreenLude
Newb
Newb

Posts : 10
Join date : 2011-01-26
Age : 29
Location : Virginia Beach

Back to top Go down

Re: Aznjap's Jrsc progress thread

Post by Sponsored content


Sponsored content


Back to top Go down

Back to top


 
Permissions in this forum:
You cannot reply to topics in this forum